+ Reply to Thread
Results 1 to 8 of 8

Thread: problem with Avantra 44 and image registration

  1. #1
    Donor yerff is on a distinguished road
    Join Date
    May 2011
    Posts
    53
    Thanks
    50
    Thanked 21 Times in 7 Posts

    problem with Avantra 44 and image registration

    Hi,

    I have a problem with my av44.

    I changed the laser (SGM).

    All is working properly except registration of the image (internal test).
    When I do a 4 dpi test, the 2400 and 3600 dpi are correct but the 1200 and 1800 dpi are partially missing. When I do a full page test in 1200,1800,2400,3600 it's ok.
    Other thing, I see a "fog" on the film : 8 big grey vertical lines.

    I have uploaded some pictures, here the links :
    http://www.4shared.com/photo/6ks4ak1p/INTERNAL_TEST_4_DPI_1.html
    http://www.4shared.com/photo/9qn82ew9/ZOOM_INTERNAL_TEST_2400DPI_5_.html
    http://www.4shared.com/photo/gkA-oOwZ/ZOOM_INTERNAL_TEST_2400DPI_5_-.html
    http://www.4shared.com/photo/iSfadhNG/ZOOM_INTERNAL_TEST_2400DPI_5_-.html

    In regard of the pictures, I just want to know if this error is from the defective SGM or DEC or if I just have to do the alignments procedures?

    Thank you,

  2. #2
    Donor Torg20 is on a distinguished road
    Join Date
    May 2011
    Posts
    63
    Thanks
    18
    Thanked 33 Times in 21 Posts
    Quote Originally Posted by yerff View Post
    Hi,

    I have a problem with my av44.

    I changed the laser (SGM).

    All is working properly except registration of the image (internal test).
    When I do a 4 dpi test, the 2400 and 3600 dpi are correct but the 1200 and 1800 dpi are partially missing. When I do a full page test in 1200,1800,2400,3600 it's ok.
    Other thing, I see a "fog" on the film : 8 big grey vertical lines.

    I have uploaded some pictures, here the links :
    http://www.4shared.com/photo/6ks4ak1p/INTERNAL_TEST_4_DPI_1.html
    http://www.4shared.com/photo/9qn82ew9/ZOOM_INTERNAL_TEST_2400DPI_5_.html
    http://www.4shared.com/photo/gkA-oOwZ/ZOOM_INTERNAL_TEST_2400DPI_5_-.html
    http://www.4shared.com/photo/iSfadhNG/ZOOM_INTERNAL_TEST_2400DPI_5_-.html

    In regard of the pictures, I just want to know if this error is from the defective SGM or DEC or if I just have to do the alignments procedures?

    Thank you,
    Hi
    I think you must check parameters BOL Position in SGM.
    If you do not know how to write and I'll help you out.

  3. The Following User Says Thank You to Torg20 For This Useful Post:

  4. #3
    Donor yerff is on a distinguished road
    Join Date
    May 2011
    Posts
    53
    Thanks
    50
    Thanked 21 Times in 7 Posts
    Quote Originally Posted by Torg20 View Post
    Hi
    I think you must check parameters BOL Position in SGM.
    If you do not know how to write and I'll help you out.
    Ok I will check it and I'll keep you updated.

    Thank you!

  5. #4
    Donor yerff is on a distinguished road
    Join Date
    May 2011
    Posts
    53
    Thanks
    50
    Thanked 21 Times in 7 Posts

    Thumbs up problem solved

    Hi Torg20,

    I have adjusted the BOL alignment.

    All patterns are on the film now.

    Thank you very much!!!

  6. #5
    Junior Member Michael_Kuehlem is on a distinguished road
    Join Date
    Apr 2013
    Location
    Germany
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Laser Avantra 44

    @yerff
    did you install a complete module from Agfa or did you buy just the Laser Diode?
    I am interested to get just a Laser Diode.
    Thank you.

    Michael

  7. #6
    PRC Member MrApogee will become famous soon enough
    Join Date
    Jan 2011
    Posts
    228
    Thanks
    140
    Thanked 87 Times in 67 Posts
    Quote Originally Posted by Michael_Kuehlem View Post
    @yerff
    did you install a complete module from Agfa or did you buy just the Laser Diode?
    I am interested to get just a Laser Diode.
    Thank you.

    Michael
    Long life the Avantras
    Sometimes I want it back.
    Sometimes better working with Film and new making plates with a Theimer Montakop or else...
    I hope you are having an Avantra with OptiSpot, I have had an Avantra44S.
    The Laser carridge are much cheaper than an new Laser for e.g. an Avalon GLV.
    I wish you a long life for your Avantra
    Kind Regards
    MrApogee

  8. #7
    Donor yerff is on a distinguished road
    Join Date
    May 2011
    Posts
    53
    Thanks
    50
    Thanked 21 Times in 7 Posts
    Quote Originally Posted by Michael_Kuehlem View Post
    @yerff
    did you install a complete module from Agfa or did you buy just the Laser Diode?
    I am interested to get just a Laser Diode.
    Thank you.

    Michael
    @Michael,

    I collected parts from another Avantra to install in mine.
    I don't know if it's possible to buy only the laser diode.
    Where are you from?
    Cheers
    Yerff

  9. #8
    Donor yerff is on a distinguished road
    Join Date
    May 2011
    Posts
    53
    Thanks
    50
    Thanked 21 Times in 7 Posts
    Quote Originally Posted by MrApogee View Post
    Long life the Avantras
    Sometimes I want it back.
    Sometimes better working with Film and new making plates with a Theimer Montakop or else...
    I hope you are having an Avantra with OptiSpot, I have had an Avantra44S.
    The Laser carridge are much cheaper than an new Laser for e.g. an Avalon GLV.
    I wish you a long life for your Avantra
    Kind Regards
    MrApogee
    Hello Mr Apogee! You're right, Avantras has a very long life and I like those machines because it's strong, stable and reliable!
    Wish you all the best!
    Cheers, Yerff

+ Reply to Thread

Similar Threads

  1. Replies: 28
    Last Post: 07-23-2017, 09:03 AM
  2. Driver for Avantra 44 in Apogee 3 Apis pac board
    By JohnQ in forum Full Plugins
    Replies: 2
    Last Post: 01-04-2012, 12:15 PM
  3. Avantra 30 Using Manual RUS
    By Stason in forum Books & Tutorials
    Replies: 0
    Last Post: 12-01-2011, 01:50 AM
  4. Avantra 30/44 service manual
    By Marco Ribeiro in forum Books & Tutorials
    Replies: 8
    Last Post: 04-29-2011, 07:03 AM
  5. Avantra 44 Service manual
    By Augusto in forum Requests
    Replies: 1
    Last Post: 03-10-2011, 04:51 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts