+ Reply to Thread
Results 1 to 9 of 9

Thread: power laser in suprasetter (Heidelberg)

  1. #1
    Junior Member pepeportomarin is on a distinguished road
    Join Date
    Apr 2011
    Posts
    1
    Thanks
    0
    Thanked 1 Time in 1 Post

    Smile power laser in suprasetter (Heidelberg)

    I will try to change the plates in this CTP, plates of ipagsa to fuji plates, Is there any manual to do it?
    Thank for advance.


  2. The Following User Says Thank You to pepeportomarin For This Useful Post:

  3. #2
    Banned frknight is on a distinguished road
    Join Date
    Dec 2010
    Posts
    94
    Thanks
    18
    Thanked 37 Times in 19 Posts

    define new plate in heidelberg suprasetter

    hi,

    It is better to contact a heidelberg agent.

    frknight

  4. The Following User Says Thank You to frknight For This Useful Post:

  5. #3
    Junior Member Freebob is on a distinguished road
    Join Date
    Dec 2011
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    Quote Originally Posted by pepeportomarin View Post
    I will try to change the plates in this CTP, plates of ipagsa to fuji plates, Is there any manual to do it?
    Thank for advance.
    You would definately need an engineer that knows Suprasetter CtP to do this plate switch. You can call your local Heidelberg or an independent service organization that offers this type of service. Please let me know where are you located and I will try to recommend a local support independent of Heidelberg.
    Peter Warzecha, Sales Manager
    Viprofix Systems For Publishing
    3650 N. Cicero Ave. Chicago IL 60641
    Phone: +1-773-545-7700 ext. 217
    Email: [email protected]
    ________________________________________________

  6. #4
    _leon_
    Guest

    Suprasetter calibartion

    Quote Originally Posted by pepeportomarin View Post
    I will try to change the plates in this CTP, plates of ipagsa to fuji plates, Is there any manual to do it?
    Thank for advance.
    For calibration plate you need to expose focus, power, gradient, slope and quality tests.
    Ipagsa IP-21 has less sensitivity than most Fuji plate. In most cases it is enough to change only focus and laser power, drum speed. Also you need password for access to Research and Development Mode.
    Recommended values for Ipagsa IP-21 are Laser Power - 95 mW, drum speed - 220 rpm

    If you need additional info, write to PM.

  7. #5
    Donor shamant is on a distinguished road shamant's Avatar
    Join Date
    Jan 2012
    Location
    RUSSIA Volgograd
    Posts
    24
    Thanks
    5
    Thanked 5 Times in 4 Posts
    Here is a manual for adding and testing material, but it is in Russian.

    Code:
    Only the registered members can see the download links/content. pleaseĀ Register to gain full access.

  8. The Following User Says Thank You to shamant For This Useful Post:

  9. #6
    Member print2011 will become famous soon enough
    Join Date
    Oct 2011
    Posts
    125
    Thanks
    33
    Thanked 49 Times in 32 Posts
    Quote Originally Posted by _leon_ View Post
    Laser Power - 95 mW, drum speed - 220 rpm
    Suprasetter have max. drum speed - 490 rpm, 220 - it's very very low speed. For me bottom level 400 rpm, else plates for out.

  10. The Following User Says Thank You to print2011 For This Useful Post:

  11. #7
    andrisssh
    Guest

    steps

    change the developer
    setup the supplier recomended values
    test focus zoom.
    laser intensity.
    Done.

  12. #8
    Donor guncis is on a distinguished road
    Join Date
    Sep 2012
    Posts
    40
    Thanks
    0
    Thanked 6 Times in 6 Posts
    Hi, can you upload this manual once again? Thanks

  13. The Following User Says Thank You to guncis For This Useful Post:

  14. #9
    Member majakhoathan is on a distinguished road
    Join Date
    Apr 2011
    Posts
    55
    Thanks
    57
    Thanked 11 Times in 6 Posts
    for whom who have to test plate on Heidelberg Suprasetter. Here are the manual

    https://drive.google.com/open?id=0BzqPE0TCAOYYZlFaQWVYLXBwRlU

+ Reply to Thread

Similar Threads

  1. Heidelberg Suprasetter Vs Kodak Trendsetter
    By djshoi in forum Computer To Plate
    Replies: 44
    Last Post: 05-07-2015, 05:52 AM
  2. Citroen LASER v.6.5
    By dancy1981 in forum Classic Tools
    Replies: 0
    Last Post: 11-13-2011, 05:20 AM
  3. Dongol lost of Suprasetter a75
    By narayan in forum Imposition & RiP
    Replies: 1
    Last Post: 10-03-2011, 09:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts