Dear friends.
I`m now installing Lotem-800II.
When i try to expose test from service shell, Lotem write errors:

Thermal 2 has supported the following head NVS parameters:
head swidth lvd strokewidth / med <0-based index> strokewidth
head soffset lvd strokeoffset / med <0-based index> strokeoffset
head swidthn lvd strokewidth / med <0-based index> strokewidth
head soffsetn lvd strokeoffset / med <0-based index> strokeoffset
head lpos foc lpos
head foffset foc offset
head wenable sys laserenable
head bpmaxerr bbs maximumerror

Error: Invalid parameter


QUANTUM>> th2 "ver"
*** Command Complete
E MPC: Learning focus profile at carriage position 257051 microns

Out of Focus error: Count = 1 Swath = 0 Posn = 17 Len = 103
Lens travel limit Error: Count = 1 Swath = 0 Posn = 1 Len = 103
[01313] Focus: Focus error: Media out of range

S MPC: Plot: Aborted
S MPC: Elapsed time = 20.205 seconds
*** Unsolicited Message 44300 Fatal

[CEH:Error Code [01313] Focus: Focus error: Media out of range]

S CRG: Stopping carriage
E GIM: STOPAT: Positions are out by > 180 degrees. Inverting counter
E GIM: STOPAT: NEW Absolute difference is 4
S MPC: Plot: Drum shutdown
*** Command Failed: 44300

[Error Code [01313] Focus: Focus error: Media out of range]

*** Command Complete
What i`m doing wrong?

Thanks a lot, and sorry for my English, but it`s foreign to me.