+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 24

Thread: Heidelberg Prepress Interface

  1. #1
    hustleruk
    Guest

    Heidelberg Prepress Interface

    Hi all...

    does anyone use heidelberg prepress interface for cip3 inking?

    tia

    hustleruk

  2. #2
    Junior Member kevyul is on a distinguished road
    Join Date
    Jan 2012
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    :S

    I use Delta on my heidelberg

  3. #3
    Junior Member rindraintsoa is on a distinguished road
    Join Date
    Jan 2012
    Posts
    24
    Thanks
    1
    Thanked 1 Time in 1 Post
    does it work well

  4. #4
    _leon_
    Guest

    Prepress Interface

    Prepress Interface is a good sollution for Heidelberg press machines. But your sheetfed press machine must have card reader or network interface (with opened license). If your press machine is older with tape recorder, you could not use Prepress Interface. If your Press machine have only card reader your need also special card reader which is connected to PC with installed Prepress Interface. Also, for good results, you need to input dot gain curves in Prepress Interface.
    If you need additional info, please, contact to PM.

  5. #5
    Banned frknight is on a distinguished road
    Join Date
    Dec 2010
    Posts
    94
    Thanks
    18
    Thanked 37 Times in 19 Posts

    Prepress Interface 3.x, 4.x, 2010

    Hi,

    Yes, I am using prepress interface with different editions since 2005.

    if need any help send me a private message.

    frknight

  6. The Following User Says Thank You to frknight For This Useful Post:

  7. #6
    Junior Member hero468 is on a distinguished road
    Join Date
    Feb 2012
    Posts
    25
    Thanks
    0
    Thanked 6 Times in 3 Posts
    heidelberg prepress interface is not working very well,it is not automatic

  8. #7
    Junior Member huyminhintaco is on a distinguished road
    Join Date
    Feb 2012
    Posts
    21
    Thanks
    89
    Thanked 8 Times in 6 Posts

    Cip 4

    I think u should use CIP 4, that is good for Tram

  9. #8
    Junior Member hero468 is on a distinguished road
    Join Date
    Feb 2012
    Posts
    25
    Thanks
    0
    Thanked 6 Times in 3 Posts
    I think it komori is using better

  10. #9
    Junior Member leftdriver is on a distinguished road
    Join Date
    Feb 2012
    Posts
    28
    Thanks
    13
    Thanked 8 Times in 8 Posts
    Quote Originally Posted by hero468 View Post
    heidelberg prepress interface is not working very well,it is not automatic
    sorry, but how do you mean that? Of course PPI is able to work completly automatically. The next generation of PPI is Press-Room-Manager from Heidelberg who has some more features. It's worth to take a look.

  11. #10
    Junior Member leftdriver is on a distinguished road
    Join Date
    Feb 2012
    Posts
    28
    Thanks
    13
    Thanked 8 Times in 8 Posts
    Quote Originally Posted by huyminhintaco View Post
    I think u should use CIP 4, that is good for Tram
    PPI is using inkzone-control, which is fully compatible with CIP 4

  12. Your ad here

  13. #11
    Junior Member leftdriver is on a distinguished road
    Join Date
    Feb 2012
    Posts
    28
    Thanks
    13
    Thanked 8 Times in 8 Posts
    Quote Originally Posted by hero468 View Post
    I think it komori is using better
    can you describe that in detail? In my opinion the principle of inkzone-control is very simple because it must only apply the dotgain-curve to the exposed plate-data and send that to the printing-machine. How is Komori better than Heidelberg? What is better? I can't believe that any other company has a better network-integration from prepress to press than Heidelberg but I'm open for new facts.

  14. #12
    Junior Member hero468 is on a distinguished road
    Join Date
    Feb 2012
    Posts
    25
    Thanks
    0
    Thanked 6 Times in 3 Posts
    The use of Komori is very simple,Beginners can quickly accept.

  15. #13
    Junior Member leftdriver is on a distinguished road
    Join Date
    Feb 2012
    Posts
    28
    Thanks
    13
    Thanked 8 Times in 8 Posts
    OK, but Heidelberg is in everydays-work simple too, because everything will done automatically without user-control. But the first installation and correct setup is not easy indeed. Is Komori able to work with printingmachines from other vendors or only Komori?

  16. #14
    Junior Member bladerunner is on a distinguished road
    Join Date
    Feb 2012
    Posts
    21
    Thanks
    1
    Thanked 1 Time in 1 Post
    PPI works absolutely automatic, you just need to create the corresponding hotfolders.
    I use it and it works great.

  17. #15
    Uploaders pennismen is just really nice pennismen is just really nice pennismen is just really nice pennismen is just really nice
    Join Date
    Oct 2010
    Location
    Spain
    Posts
    171
    Thanks
    115
    Thanked 439 Times in 54 Posts
    Today a install 2011 version but i have small question;

    Late i open PPI and create my machine SM102 and configure Output in
    E:\PPIJobs\PPFOut\SM102 (here i get ppf files ready for load but i want that it export to USB omnidrive CARD for load in machine).

    Late in process i create the same... SM102 and load files from METADIMENSION Folder. I never use ppf before but my problem is that PPI can get files from REMOTE FOLDER (metadimension), process it and save in PPFOut\SM102 but the questión is:

    How i can make that output in CARD of HEIDELBERG by Omnidrive because i can open in EXPLORER.

    Only need know how configure for output directly in CARD and put card in MACHINE for start to PRINT.

    thanks a lot for all who answer me this is very important because now the machine no have CIP3.

    Thanks again.

    I Solve de problem.... install new drivers for CSM Omnidrive Professional and now work fine!!
    Last edited by pennismen; 03-07-2012 at 01:44 AM.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Heidelberg Prinect Prepress Interface 4.5
    By pennismen in forum Full Software
    Replies: 37
    Last Post: 06-17-2014, 09:15 PM
  2. Prinect PrePress Interface 4.5.1, DVD ISO
    By xiaolinjob in forum Classic Tools
    Replies: 1
    Last Post: 01-17-2013, 01:19 PM
  3. Open Prepress Interface (OPI)
    By macino in forum Requests
    Replies: 1
    Last Post: 02-01-2012, 11:28 PM
  4. Heidelberg Prinect Prepress Interface
    By zuz43 in forum Graphic Design
    Replies: 2
    Last Post: 10-05-2011, 12:21 AM
  5. Prinect PrePress Interface
    By lxl1988 in forum Requests
    Replies: 0
    Last Post: 11-22-2010, 04:43 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts