+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 21

Thread: fuji luxel VX 9600

  1. #1
    Junior Member qure is on a distinguished road
    Join Date
    Dec 2010
    Posts
    29
    Thanks
    21
    Thanked 3 Times in 3 Posts

    fuji luxel VX 9600

    i have good offer to buy CTP. does anybody have any experience with that CTP any suggestions pros or cons. thank you




  2. Your Ads Here
  3. #2
    PRC Member saifou will become famous soon enough
    Join Date
    May 2011
    Posts
    167
    Thanks
    11
    Thanked 51 Times in 41 Posts
    tel me more about this offer to help u

  4. #3
    PRC Member ChristianSTG will become famous soon enough
    Join Date
    Dec 2010
    Posts
    166
    Thanks
    7
    Thanked 43 Times in 36 Posts

    Yes let me know the type and configuration

    Is one otwo beam?
    Automatic or manual loading plates?
    Have rip version and vendor?

  5. The Following User Says Thank You to ChristianSTG For This Useful Post:

  6. #4
    Junior Member qure is on a distinguished road
    Join Date
    Dec 2010
    Posts
    29
    Thanks
    21
    Thanked 3 Times in 3 Posts
    two beam multiple cassette autoloader + cassette trolley : LP 1260 P; plate baking oven Techno-Grafica Diamant EBO 1250 - spoel- SPG 1250; - platestacker: PST 1250 ; software RIP: Celebrant Extreme Server Luxel

  7. #5
    Member alliswell is on a distinguished road
    Join Date
    Jun 2011
    Posts
    70
    Thanks
    28
    Thanked 10 Times in 7 Posts
    good and rugged machine

  8. The Following User Says Thank You to alliswell For This Useful Post:

  9. #6
    Junior Member xfmax is on a distinguished road
    Join Date
    Dec 2011
    Posts
    19
    Thanks
    0
    Thanked 2 Times in 1 Post
    ??thanks

  10. #7
    PRC Member ChristianSTG will become famous soon enough
    Join Date
    Dec 2010
    Posts
    166
    Thanks
    7
    Thanked 43 Times in 36 Posts

    is very good configuration

    I have same machine and give prepress service, is very more stable of thermal system.

    this especific configuration is large, but if is installed by good enginer, is very stable, one litle tips, install over very stable, clean and plane floor. whitout ceramic tiles or similar.

  11. The Following User Says Thank You to ChristianSTG For This Useful Post:

  12. #8
    Junior Member qure is on a distinguished road
    Join Date
    Dec 2010
    Posts
    29
    Thanks
    21
    Thanked 3 Times in 3 Posts
    thanks for help ... will be posting after installing

  13. #9
    PRC Member saifou will become famous soon enough
    Join Date
    May 2011
    Posts
    167
    Thanks
    11
    Thanked 51 Times in 41 Posts
    hi
    the only problem that frustrate with this machine is th electro acoustic defelector in 2 beam model
    the mono beam is more stable
    machine can run more than 5 years with minor problem
    easy to fix

  14. The Following User Says Thank You to saifou For This Useful Post:

  15. #10
    Member josemapenta is on a distinguished road
    Join Date
    Dec 2010
    Posts
    60
    Thanks
    32
    Thanked 14 Times in 13 Posts

    Cool Eod

    Quote Originally Posted by saifou View Post
    hi
    the only problem that frustrate with this machine is th electro acoustic defelector in 2 beam model
    the mono beam is more stable
    machine can run more than 5 years with minor problem
    easy to fix
    the name is EOD (electro-optic deflector), and in some units become some problems with stressed resistance that opens and fails, but it's a cheap repair.

  16. Your ad here

  17. The Following User Says Thank You to josemapenta For This Useful Post:

  18. #11
    PRC Member saifou will become famous soon enough
    Join Date
    May 2011
    Posts
    167
    Thanks
    11
    Thanked 51 Times in 41 Posts
    Quote Originally Posted by josemapenta View Post
    the name is EOD (electro-optic deflector), and in some units become some problems with stressed resistance that opens and fails, but it's a cheap repair.
    thanks u are right electro optic defelection other method to use acoustic effect to deflect the beam
    http://utopia.cord.org/cm/leot/course04_mod07/mod04_07.htm
    let me know how to repair without new one

  19. The Following User Says Thank You to saifou For This Useful Post:

  20. #12
    Donor willie0869 is on a distinguished road
    Join Date
    Jan 2012
    Posts
    27
    Thanks
    3
    Thanked 5 Times in 4 Posts
    Solid CTP device, but... Because it is a violet machine, maintaining the temperature in the room is critical. The plates are sensitive to light, so a dark room is necessary for loading plates. Be prepared to check screens daily, and adjust regularly. Very light screen tints (5% or less) will vary across the plate.

  21. The Following User Says Thank You to willie0869 For This Useful Post:

  22. #13
    Junior Member shiv is on a distinguished road
    Join Date
    Dec 2011
    Posts
    49
    Thanks
    7
    Thanked 13 Times in 8 Posts
    This is a very fast & good violet CTP machine. We are using it in our prepress. It gives good results and run-length with fuji violet plates and also processor maintenance is simple

  23. The Following User Says Thank You to shiv For This Useful Post:

  24. #14
    PRC Member indra1 is on a distinguished road
    Join Date
    Oct 2011
    Location
    Jakarta
    Posts
    49
    Thanks
    27
    Thanked 30 Times in 17 Posts
    Quote Originally Posted by willie0869 View Post
    Solid CTP device, but... Because it is a violet machine, maintaining the temperature in the room is critical. The plates are sensitive to light, so a dark room is necessary for loading plates. Be prepared to check screens daily, and adjust regularly. Very light screen tints (5% or less) will vary across the plate.
    Hi, I confirm stable 24/7 room temperature requirement and also suggest to store plate at same temperature at least 48 - 72 hours prior to imaging for a more stable results.
    Try to avoid temperatures above 27 C for plate transport and storage to reduce variance in highlight dots.
    However, since the plate is sensitive to blue/violet light, a moderately bright yellow filtered lighting is sufficient, suggest using transparent/translucent yellow filter on fluorescent lights and window openings. I have seen some sites use yellow/orange 3M transparent sticker mounted on clear film as lighting filter and yellow/orange transparent acrylic as window filter. No need for a "photography grade" dark room. Consult plate supplier for more details.
    Machine is mechanically quite rugged, however lasers and modulators/deflectors have a lifetime between 2 - 5 years depending on usage. Room humidity above 60% may affect the usable life of modulators/deflectors, consider using dehumidifier appropriately.

  25. The Following User Says Thank You to indra1 For This Useful Post:

  26. #15
    Member josemapenta is on a distinguished road
    Join Date
    Dec 2010
    Posts
    60
    Thanks
    32
    Thanked 14 Times in 13 Posts

    Cool how to, of course!

    Quote Originally Posted by saifou View Post
    let me know how to repair without new one
    The EOD is very expensive, but too solid, when errors 165 for older firmwares or errors 121, 122 or 123 becomes, there are problems with them. You have to take a look to the driver of EOD, the EODHV PCB.
    You have to check the resistors R1 to R12 in the EODHV board, if anyone is open, change it.
    If not, carefully check the high voltage wires of the EODs, I have seen some of them broken inside.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Fuji Luxel F-6000
    By Torg20 in forum Computer To Plate
    Replies: 10
    Last Post: 10-19-2013, 01:22 PM
  2. Fuji Luxel T6300 which card for connection
    By behre in forum Computer To Plate
    Replies: 5
    Last Post: 11-23-2012, 11:35 AM
  3. Best rip for 9600?
    By sanimir in forum General Chat
    Replies: 2
    Last Post: 11-23-2011, 11:41 AM
  4. FUJI Luxel V6 CTP error code guide
    By JoxMNE in forum Books & Tutorials
    Replies: 0
    Last Post: 07-23-2011, 03:37 AM
  5. service manual Fuji Luxel T-9500
    By bigtee in forum Requests
    Replies: 0
    Last Post: 05-20-2011, 10:02 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts