+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 16 to 25 of 25

Thread: DotMate 7500 Error

  1. #16
    Donor ikar098 is on a distinguished road
    Join Date
    Feb 2011
    Posts
    67
    Thanks
    3
    Thanked 5 Times in 5 Posts

    dotmate error

    I solved the problem
    It was motor on the developing machine who was working with little not working periods during developing.

    thanks evryone

    Quote Originally Posted by jungle View Post
    Dear ikar098,

    Please, pay attention in some orings and conveyer.

    best regards,

  2. #17
    Junior Member jackap is on a distinguished road
    Join Date
    May 2011
    Posts
    10
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by ikar098 View Post
    I solved the problem
    It was motor on the developing machine who was working with little not working periods during developing.

    thanks evryone
    Could you go into more detail about?
    Replace the hardware or Repair hardware ?

  3. #18
    Donor ikar098 is on a distinguished road
    Join Date
    Feb 2011
    Posts
    67
    Thanks
    3
    Thanked 5 Times in 5 Posts
    Quote Originally Posted by jackap View Post
    Could you go into more detail about?
    Replace the hardware or Repair hardware ?
    Hello
    I was checking the main motor on developing machine, the problem stopt but recently it shows again.
    Today my machine (Dotmate 7500) show me error when i try to output file it starts the spinner and then shows paper Jam Error (nothing is jamed inside), and few time is shown Filter zero switch not found. I did not work with the machine 2 week before that error happend.
    Does anyone meet wit this kind of error.

    Thanks

  4. #19
    Junior Member getist is on a distinguished road
    Join Date
    Mar 2013
    Posts
    9
    Thanks
    1
    Thanked 2 Times in 2 Posts

    making print

    Hi friends,
    am having a problem with my dotmate 7500. anytime i print out a film, let say 4 colors job. the last color always remain in the machine. to get that last color out, unless i send a new job out before i can have that last color. in that case, i always have one film (job) lock in the machine. i feel something is not working right.
    any help

  5. #20
    Junior Member getist is on a distinguished road
    Join Date
    Mar 2013
    Posts
    9
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Dotmate 7500 ctf

    Error: Paper Jam. 0907 CarProtect, media at Car.

    Please, what is this error about any help. Thx

  6. #21
    Donor ikar098 is on a distinguished road
    Join Date
    Feb 2011
    Posts
    67
    Thanks
    3
    Thanked 5 Times in 5 Posts

    domate

    Quote Originally Posted by getist View Post
    Dtmate 7500

    Error: Paper Jam. 0907 CarProtect, media at Car.

    Please, what is this erro about any help. Thx
    It is prabably some of the sensors inside the machine try to pull out the conveyor system and check the film passing sensors

  7. The Following User Says Thank You to ikar098 For This Useful Post:

  8. #22
    Junior Member getist is on a distinguished road
    Join Date
    Mar 2013
    Posts
    9
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by ikar098 View Post
    It is prabably some of the sensors inside the machine try to pull out the conveyor system and check the film passing sensors


    Thanks, i have some sensors available so will try and change them.

  9. #23
    Junior Member getist is on a distinguished road
    Join Date
    Mar 2013
    Posts
    9
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by ikar098 View Post
    It is prabably some of the sensors inside the machine try to pull out the conveyor system and check the film passing sensors


    Hi, i change one or two sensor, error goes off. but after working for sometime it comes back again. anyone have idea pls.

  10. #24
    Junior Member getist is on a distinguished road
    Join Date
    Mar 2013
    Posts
    9
    Thanks
    1
    Thanked 2 Times in 2 Posts

    dotmate 7500 processor

    Hi,
    Anyone know about this error

    Motor Overload
    Motor Tachometer

    it's show on the processor

    Thanks

  11. #25
    Donor ikar098 is on a distinguished road
    Join Date
    Feb 2011
    Posts
    67
    Thanks
    3
    Thanked 5 Times in 5 Posts

    Motor

    HEllo
    This error is for the motor that drives the rollers in developing machine. im shoore that is the rollers are stuck and make motor dificult to rotate and the machine stops the motor and disply this error
    CHECK the rollers

  12. Your ad here

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2

Similar Threads

  1. dotmate 7500
    By ikar098 in forum Computer To Plate
    Replies: 22
    Last Post: 03-09-2015, 11:17 PM
  2. PDF Native Read Error: ERROR: PDFREAD 3 on file:...
    By emilio9cya in forum General Chat
    Replies: 3
    Last Post: 01-04-2014, 06:21 AM
  3. Manual epson stylus pro 7500
    By maskara in forum Books & Tutorials
    Replies: 0
    Last Post: 09-16-2012, 01:39 PM
  4. Epson 7500 help please
    By samjana in forum Imposition & RiP
    Replies: 8
    Last Post: 02-26-2012, 10:14 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts