+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 20

Thread: Accuset 1000 Service Manual

  1. #1
    Junior Member Tekcontrol2 is on a distinguished road
    Join Date
    Jul 2012
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Exclamation Accuset 1000 Service Manual

    Does Anybody has the Accuset 1000 Service Manual?

  2. #2
    Donor tooseyboy is on a distinguished road
    Join Date
    Jul 2012
    Location
    UK
    Posts
    13
    Thanks
    2
    Thanked 11 Times in 3 Posts

    Accuset 1000 user guide

    Don't have a service manual, but not much to service on these machines either work or they don't

    Below is a link to a user guide to the Agfa Accuset 1000 in pdf format

    Code:
    Only the registered members can see the download links/content. pleaseĀ Register to gain full access.

    Please come back and thank me if you find it useful

  3. #3
    Junior Member Tekcontrol2 is on a distinguished road
    Join Date
    Jul 2012
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Thanks for the user guide but I guess I need the service manual because the problem I've is a permanent Media Error.

  4. #4
    Donor tooseyboy is on a distinguished road
    Join Date
    Jul 2012
    Location
    UK
    Posts
    13
    Thanks
    2
    Thanked 11 Times in 3 Posts
    What is the error message, i had one of these accuset's for years maybe i can help

  5. #5
    Junior Member Tekcontrol2 is on a distinguished road
    Join Date
    Jul 2012
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Exclamation

    The problem is that loading a brand new roll of film, after loading the film, I got the Media Error message, I try to reload a lot of times with the same result. The supply cassette seems to be ok, so I understand the only thing to check are the Pots and other stuff that control the tension Arm.

  6. #6
    Donor tooseyboy is on a distinguished road
    Join Date
    Jul 2012
    Location
    UK
    Posts
    13
    Thanks
    2
    Thanked 11 Times in 3 Posts
    is this machine new to you or have you replaced the film before, i always used to make sure that all the paper on the beginning of the film was through all the rollers otherwise i had the same problem

  7. #7
    Junior Member Tekcontrol2 is on a distinguished road
    Join Date
    Jul 2012
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts
    The machine is a used one, we bought it about three months ago, and these is our first use, but it was working before.

  8. #8
    Donor tooseyboy is on a distinguished road
    Join Date
    Jul 2012
    Location
    UK
    Posts
    13
    Thanks
    2
    Thanked 11 Times in 3 Posts
    You must be doing something wrong, check the user manual i sent and make sure you do it in the order it says, you will also have to set the new length of film otherwise it will give you another error "Film out or low" make sure the cassette is sitting on the feed roller in the cassette housing

  9. #9
    Junior Member Tekcontrol2 is on a distinguished road
    Join Date
    Jul 2012
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Unfortunately I'm not making nothing wrong, I try again with another cassette and another roll of film and the problem is the same. But I notice the Media Motor support is broke, I repair it and it works fine once. but now I have mixed errors, between media error and Media motor error. I would like to understand the loading procedure because sometimes the whole film is pulled back to the supply cassette.

  10. #10
    Donor tooseyboy is on a distinguished road
    Join Date
    Jul 2012
    Location
    UK
    Posts
    13
    Thanks
    2
    Thanked 11 Times in 3 Posts
    Here is a video for you to watch

    http://www.youtube.com/watch?v=_heL7VWrMsw

  11. Your ad here

  12. #11
    Donor Torg20 is on a distinguished road
    Join Date
    May 2011
    Posts
    63
    Thanks
    18
    Thanked 33 Times in 21 Posts
    Service manual for accuset

    https://rapidshare.com/files/768148284/agfa_accuset_service_manual_1.pdf

  13. The Following 3 Users Say Thank You to Torg20 For This Useful Post:

  14. #12
    Junior Member Tekcontrol2 is on a distinguished road
    Join Date
    Jul 2012
    Posts
    11
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Thank You Very Much, I'm going to put hands on it.

  15. #13
    Member carlossc73 is on a distinguished road
    Join Date
    Feb 2013
    Posts
    54
    Thanks
    6
    Thanked 8 Times in 8 Posts

    Accuset Service Manual

    Hello can you reupload the Manual links are Down Thanks.

    Quote Originally Posted by Tekcontrol2 View Post
    Thank You Very Much, I'm going to put hands on it.

  16. #14
    Junior Member jungle is on a distinguished road
    Join Date
    Jul 2013
    Posts
    24
    Thanks
    16
    Thanked 4 Times in 4 Posts
    Please,

    Share the link again.

    Thanks

    Quote Originally Posted by carlossc73 View Post
    Hello can you reupload the Manual links are Down Thanks.

  17. #15
    Donor Torg20 is on a distinguished road
    Join Date
    May 2011
    Posts
    63
    Thanks
    18
    Thanked 33 Times in 21 Posts
    Link:
    Code:
    Only the registered members can see the download links/content. pleaseĀ Register to gain full access.


    Quote Originally Posted by jungle View Post
    Please,

    Share the link again.

    Thanks

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Does esko rip work with accuset 1000
    By Rayme in forum Packaging Technology
    Replies: 4
    Last Post: 02-28-2013, 07:09 AM
  2. Avantra 44 service manual
    By PerT in forum Books & Tutorials
    Replies: 5
    Last Post: 07-03-2012, 06:11 AM
  3. service manual
    By ikar098 in forum Requests
    Replies: 3
    Last Post: 02-14-2012, 08:44 AM
  4. ApogeeX v.4 service manual
    By ExSUNNY in forum Books & Tutorials
    Replies: 0
    Last Post: 05-15-2011, 12:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts