+ Reply to Thread
Results 1 to 3 of 3

Thread: Rip Help for multi printers

  1. #1
    Junior Member Flavio_ is on a distinguished road
    Join Date
    Jul 2013
    Posts
    9
    Thanks
    0
    Thanked 1 Time in 1 Post

    Question Rip Help for multi printers

    Hello all,
    i just arrived here and i need to post this thread because i can't arrive where i want!!

    I have a Mutoh Valuejet 1304EU, a Mimaki JV33-160 and to cut a Mutoh Kona 1400. I have like rip Sai PhotoPrint SE 10 and RasterLink.
    My problem is that to cut with Kona i can only use Photoprint SE 10 because i've the plugin to send immediately the printed file to the cut section. I can do this with the Vj1304 and with JV33 but only of them each time and each time i've to delete and create the new printer. I know that with another RIP or a better (the SE is the basic ) i can leave both printers and the cutter.

    Otherwise, i wanna ask you if there's a way to do the same thing that Photoprint do with the Kona with Rasterlink ( a plugin or whatelse )

    If you need more information ask me.

    And for last.... Please help me!!!! :D

    Flavio

  2. #2
    Junior Member quinngarry is on a distinguished road
    Join Date
    Jul 2013
    Posts
    5
    Thanks
    6
    Thanked 2 Times in 2 Posts

    RIPs to try

    I service most printers and have used almost all of the Rips.

    I have found of the best Rips for a sign maker with multi machines would be Flexisign. Compared to what you are using Sai PhotoPrint SE 10, flexi is much easer to use, the built in drivers are excellent and Production Manager is good for sizing etc.
    However, if you do switch it will take you a while to get to grips with colour management. Having a spectromonitor would be a good investment because Flexi has its own color management software built in. You can of course down load profiles as well and your machines are quite common

  3. #3
    Junior Member Flavio_ is on a distinguished road
    Join Date
    Jul 2013
    Posts
    9
    Thanks
    0
    Thanked 1 Time in 1 Post
    Thank you for your quick reply. Yes i tried photoprint dx demo and was better and surely flexisign were my objective. I downloaded a version here but it need a password that wasn't write, at least in guest forum version that's why i registered here and try to find it ehehhehhe. If you have it, could you share it with me? Thanks a lot

    Flavio

+ Reply to Thread

Similar Threads

  1. Matching 2 printers together
    By kassinopious in forum Color Proofing Management
    Replies: 5
    Last Post: 05-14-2013, 03:08 AM
  2. Multi-Installation And Multi-Boot Flash v1.0.1
    By Bruce Sy in forum Classic Tools
    Replies: 0
    Last Post: 09-20-2012, 09:44 AM
  3. Multi-installation and multi-boot flash 1.0.1
    By SOFTWARE in forum Classic Tools
    Replies: 0
    Last Post: 09-19-2012, 02:36 PM
  4. Printers Apprentice v8.1.20.1
    By djenous in forum Classic Tools
    Replies: 0
    Last Post: 12-17-2011, 02:03 AM
  5. Printers Apprentice v8.1.19.1
    By worker in forum Classic Tools
    Replies: 0
    Last Post: 06-10-2011, 01:31 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts