Connection with SM74?
How to connect, Heidelberg Sm74 cp2000 and axis control, with other prinect software.
What are requirements?
We using Kodak software (prinergy,preps, printflow dips for connection with sm74 over job memory card).
I like to try heidelberg software.
You will need Prinect Prepress Interface, the Job Memory card drive (or activate the license on CP2000/Presscenter to turn it online).
Originally Posted by mig666
What's your configuration?
The Following User Says Thank You to cabloco For This Useful Post:
Originally Posted by cabloco
Thanks for reply. We are using kodak software. I like to try heidelberg prinect ,
I have cracked version of signa station,prepress interface,metadimension,workflow...
"Try before buy" I will try to install those software.
Here is what I want to do (workflow):
1.Prinance (I don`t have it)
Is very important that you installed in sm-74 prepress interface, but if you not installing, not working.
You use Metadimension to RIP your imposition job with Signastation, and have the CIP3 data produce by Metadimension.
Copy your CIP3 data to Prepress Interface with SM74 process and you will have the ink presetting data for your SM74.
Up to here you will need a Heidelberg Job Memory Card and the drive in your Prepress Interface computer to copy the ink presetting data to your press that using CP2000 while press that using Press Center then you can use USB Drive. (for this you need Prepress Interface v.4.x)
With Preset Link/Instant Gate activated in your CP2000/Press Center you can use network connection to get the ink presetting but you need to configure the online configuration both side, in the Prepress Interface and also in the CP2000/Press Center.