+ Reply to Thread
Results 1 to 15 of 15

Thread: Access to Printing Resource Center?

  1. #1
    Member todesign is on a distinguished road
    Join Date
    Jun 2013
    Posts
    79
    Thanks
    14
    Thanked 30 Times in 18 Posts

    Access to Printing Resource Center?

    Hi,

    Having great difficulty contacting any on here to get access to print resource center I've tried babajingjumong : no reply, tried a MOD and the guy that sends you a welcome message when you join still had no luck :(

    I know I don't have all the requirements yet but it say's if you share software you can get access and I've got software :)


    anybody know any active staff? (i know there must be loads just bad luck)

    kind regards

    tom
    Last edited by todesign; 07-02-2013 at 11:47 AM.

  2. The Following User Says Thank You to todesign For This Useful Post:

  3. #2
    PRC Member spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all
    Join Date
    Nov 2010
    Posts
    1,348
    Thanks
    126
    Thanked 627 Times in 357 Posts
    Quote Originally Posted by todesign View Post
    Hi,

    Having great difficulty contacting any on here to get access to print resource center I've tried babajingjumong : no reply, tried a MOD and the guy that sends you a welcome message when you join still had no luck :(

    I know I don't have all the requirements yet but it say's if you share software you can get access and I've got software :)


    anybody know any active staff? (i know there must be loads just bad luck)

    kind regards

    tom
    what is so hard to understand at the forum rules?

    they say you have to meet AT LEAST o.n.e condition!

    this means only o.n.e condition like uploading software might not be sufficient for access.

    you dont have to contact any staff member.
    you have to be active here for more than o.n.e month on a regular basis.

    if you want to upload software (which isnt already here!!!!) you are welcome to do so.

    contacting @babajingjumong for reviews only makes sense if you have posted or uploaded already.
    and if he doesnt answer immediately maybe he is busy or on vacation. dont be impatient!

  4. The Following User Says Thank You to spider For This Useful Post:

  5. #3
    Banned weisze will become famous soon enough
    Join Date
    Jun 2013
    Posts
    53
    Thanks
    8,235
    Thanked 48 Times in 22 Posts
    I apologize for derailing the thread but ...

    I notice you use "o.n.e". Do you know why the forum software removes spelt-out numbers? It seems like a rather odd bug ...
    Last edited by weisze; 10-18-2014 at 12:31 AM.

  6. #4
    PRC Member spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all
    Join Date
    Nov 2010
    Posts
    1,348
    Thanks
    126
    Thanked 627 Times in 357 Posts
    Quote Originally Posted by weisze View Post
    I apologize for derailing the thread but ...

    I notice you use "o.n.e". Do you know why the forum software removes spelt-out numbers? It seems like a rather odd bug ...
    this happens since the last board crash.

    either its a bug or its a protection against hackers to avoid malicious code.

    i dont know.

  7. The Following User Says Thank You to spider For This Useful Post:

  8. #5
    Banned weisze will become famous soon enough
    Join Date
    Jun 2013
    Posts
    53
    Thanks
    8,235
    Thanked 48 Times in 22 Posts
    Quote Originally Posted by spider View Post
    this happens since the last board crash.

    either its a bug or its a protection against hackers to avoid malicious code.

    i dont know.
    Ahh. It's not a critical error anyway, though it could get confusing when "mo.n.ey" becomes "my". lol
    Last edited by weisze; 10-18-2014 at 12:31 AM.

  9. #6
    Donor TRAUCO1958 is on a distinguished road
    Join Date
    Jan 2013
    Posts
    98
    Thanks
    61
    Thanked 31 Times in 20 Posts

    Unhappy same problem

    Quote Originally Posted by todesign View Post
    Hi,

    Having great difficulty contacting any on here to get access to print resource center I've tried babajingjumong : no reply, tried a MOD and the guy that sends you a welcome message when you join still had no luck :(

    I know I don't have all the requirements yet but it say's if you share software you can get access and I've got software :)


    anybody know any active staff? (i know there must be loads just bad luck)

    kind regards

    tom
    no way to share no way to download maybe the only way is paying the 50 dollars i dont know other way but i dont know if thats works

  10. The Following User Says Thank You to TRAUCO1958 For This Useful Post:

  11. #7
    PRC Member spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all
    Join Date
    Nov 2010
    Posts
    1,348
    Thanks
    126
    Thanked 627 Times in 357 Posts
    Quote Originally Posted by TRAUCO1958 View Post
    no way to share no way to download maybe the only way is paying the 50 dollars i dont know other way but i dont know if thats works
    you can see which member here is prc and which member is donor.

    so this is the proof that both ways will work!

  12. The Following User Says Thank You to spider For This Useful Post:

  13. #8
    Donor TRAUCO1958 is on a distinguished road
    Join Date
    Jan 2013
    Posts
    98
    Thanks
    61
    Thanked 31 Times in 20 Posts

    Red face OK

    Quote Originally Posted by spider View Post
    you can see which member here is prc and which member is donor.

    So this is the proof that both ways will work!
    thanks i understand

  14. The Following User Says Thank You to TRAUCO1958 For This Useful Post:

  15. #9
    Member todesign is on a distinguished road
    Join Date
    Jun 2013
    Posts
    79
    Thanks
    14
    Thanked 30 Times in 18 Posts
    Quote Originally Posted by spider View Post
    what is so hard to understand at the forum rules?

    they say you have to meet AT LEAST o.n.e condition!

    this means only o.n.e condition like uploading software might not be sufficient for access.

    you dont have to contact any staff member.
    you have to be active here for more than o.n.e month on a regular basis.

    if you want to upload software (which isnt already here!!!!) you are welcome to do so.

    contacting @babajingjumong for reviews only makes sense if you have posted or uploaded already.
    and if he doesnt answer immediately maybe he is busy or on vacation. don't be impatient!
    waiting more than 3 weeks for a reply is not seen as being impatient!

    So do i just plonk my software in the graphic design forum? as that's would be the next logical place?

  16. The Following User Says Thank You to todesign For This Useful Post:

  17. #10
    Donor TRAUCO1958 is on a distinguished road
    Join Date
    Jan 2013
    Posts
    98
    Thanks
    61
    Thanked 31 Times in 20 Posts

    Red face a little help

    Quote Originally Posted by spider View Post
    what is so hard to understand at the forum rules?

    they say you have to meet AT LEAST o.n.e condition!

    this means only o.n.e condition like uploading software might not be sufficient for access.

    you dont have to contact any staff member.
    you have to be active here for more than o.n.e month on a regular basis.

    if you want to upload software (which isnt already here!!!!) you are welcome to do so.

    contacting @babajingjumong for reviews only makes sense if you have posted or uploaded already.
    and if he doesnt answer immediately maybe he is busy or on vacation. dont be impatient!
    how i can upload i try to upload and no way
    or i need only to give a link thats is the question
    be patient with the people the only thing is we want to give more to the forum thas all

  18. Your ad here

  19. The Following User Says Thank You to TRAUCO1958 For This Useful Post:

  20. #11
    PRC Member spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all
    Join Date
    Nov 2010
    Posts
    1,348
    Thanks
    126
    Thanked 627 Times in 357 Posts
    Quote Originally Posted by TRAUCO1958 View Post
    how i can upload i try to upload and no way
    or i need only to give a link thats is the question
    be patient with the people the only thing is we want to give more to the forum thas all
    upload your software to some filehoster like rapidshare or uploaded.net
    and post the link in your own thread.

    your archive has to be password protected and take care that the soft isnt already here!

  21. The Following 2 Users Say Thank You to spider For This Useful Post:

  22. #12
    Donor TRAUCO1958 is on a distinguished road
    Join Date
    Jan 2013
    Posts
    98
    Thanks
    61
    Thanked 31 Times in 20 Posts

    Red face OK

    Quote Originally Posted by spider View Post
    upload your software to some filehoster like rapidshare or uploaded.net
    and post the link in your own thread.

    Your archive has to be password protected and take care that the soft isnt already here!
    thanks a lot

  23. The Following User Says Thank You to TRAUCO1958 For This Useful Post:

  24. #13
    x29
    x29 is offline
    Junior Member x29 is on a distinguished road
    Join Date
    Jul 2013
    Posts
    8
    Thanks
    1
    Thanked 2 Times in 1 Post
    Quote Originally Posted by spider View Post
    what is so hard to understand at the forum rules?

    they say you have to meet AT LEAST o.n.e condition!

    this means only o.n.e condition like uploading software might not be sufficient for access.

    you dont have to contact any staff member.
    you have to be active here for more than o.n.e month on a regular basis.

    if you want to upload software (which isnt already here!!!!) you are welcome to do so.

    contacting @babajingjumong for reviews only makes sense if you have posted or uploaded already.
    and if he doesnt answer immediately maybe he is busy or on vacation. dont be impatient!
    I agree with the thread starter.
    The rules aren't very hard to understand, but it is a bit difficult to find clear info about how to share/upload software on this forum.

    You are right though, it does say you have to "meet at least o.n.e of the following conditions". So it is also possible that an upload might be sufficient to access the Printing Resource Center.

    In this thread it says that you should compress your software with "printroot.com" as a password and upload it to a file sharing site, and then post the link in a new thread.
    The only thing I still can't find is any mentioning in which forum newbies should post their links. I have seen links to software in the General Discussions sub forums, so I guess that is where we're supposed to upload.

    I would suggest that this part of the PrintRoot Forums Rules is made clear, and if possible, write-only access to the Full Software forum is granted for newbies, to make it easier for every to find new software. If not, maybe create a new forum just for uploads from newbies who want to get full access.

  25. The Following 2 Users Say Thank You to x29 For This Useful Post:

  26. #14
    Banned abcdede is on a distinguished road
    Join Date
    Jul 2013
    Posts
    23
    Thanks
    5
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by x29 View Post
    In this thread it says that you should compress your software with "printroot.com" as a password and upload it to a file sharing site, and then post the link in a new thread.
    The only thing I still can't find is any mentioning in which forum newbies should post their links. I have seen links to software in the General Discussions sub forums, so I guess that is where we're supposed to upload.

    I would suggest that this part of the PrintRoot Forums Rules is made clear, and if possible, write-only access to the Full Software forum is granted for newbies, to make it easier for every to find new software. If not, maybe create a new forum just for uploads from newbies who want to get full access.
    Right... That's also what I think.
    It's a bit unclear where to upload and how. A suggestion would be to put a link on "upload" in the message about the rules to a forum thread that explains it in more detail... as the mods try to encourage people to upload, they should also be interested in making it easier to do it the way they want it to happen.

  27. The Following User Says Thank You to abcdede For This Useful Post:

  28. #15
    Member todesign is on a distinguished road
    Join Date
    Jun 2013
    Posts
    79
    Thanks
    14
    Thanked 30 Times in 18 Posts
    Quote Originally Posted by abcdede View Post
    Right... That's also what I think.
    It's a bit unclear where to upload and how. A suggestion would be to put a link on "upload" in the message about the rules to a forum thread that explains it in more detail... as the mods try to encourage people to upload, they should also be interested in making it easier to do it the way they want it to happen.
    See, I'm not the only that thinks it's unclear. In other forums if you simply went posting download links where ever you wanted you'd be banned before you got to the end of the week. I'm sure this has happened to loads of people atleast once in there life.

  29. The Following User Says Thank You to todesign For This Useful Post:

+ Reply to Thread

Similar Threads

  1. Impossible to access Printing Resource Center
    By Ale_Paris in forum Forum Suggestions & Feedback
    Replies: 24
    Last Post: 02-04-2014, 01:51 AM
  2. access to the printing resource center forum
    By saintbacchus in forum General Chat
    Replies: 7
    Last Post: 07-24-2013, 12:07 AM
  3. Printing Resource Center
    By CP3088 in forum Forum Rules and Guidelines
    Replies: 1
    Last Post: 02-03-2013, 02:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts