An issue still exists with Cut Server crack and not being able to select an input folder, working on it.....
For now it is quite easy to export via UNC paths and mapped drives from XF Computer 1 (101796672) - Export in XF Client to XF Computer 2 (153844067) input folder in preferences in EFI Cut Server.
For print and cut enabled printers enter the IP address of the device in XF Client on 101796672 instead of the export function....I think 153844067 is not required for this, I don't have a device to test........
Last edited by Willburwilde; 01-21-2016 at 01:07 AM.
Added Fiery XF 6.2 Pro Mac Client to first post
What is the Pro Version adding to the normal one?
i had EFI running.. didnt use it.. now after like a month.. the Server is red.
i tried everything.. didnt get it to work.
deinstalled.. used license 153844067_Wilde - and it worked..
then i upgraded to 6.2.2 and it stopped.. couldnt get it to work
with the other license.. no Chance.. log said too many users on license?
any ideas are apreciated
with this 153 license... i cant choose a Printer ... and veryfier Option is grayed.. ist so strange
Last edited by T. Schruda; 02-28-2016 at 11:01 AM.
2. You cannot have the line "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Multi Key" or "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\NEWHA SP"
in your registry else XF Server will not start. As of 6.2 EFI XF searches the registry for those key. Hence it not starting.
3. Make sure the above registry key is removed and make sure you use the latest Multikey Dongle emulator on the first post.
4. Should be all good then ;)
...and do not use vUSB with 6.2 or later, I have updated first post with only Multikey to avoid confusion...
Last edited by Willburwilde; 02-28-2016 at 02:46 PM.
Part A problem with Windows Server 2008 Enterprise R2 x64: devcon failed.
I have tried with the compatibility setting to Windows 7, but still not working.
I have tried to continue the installation, but the dongle is not found.
Last edited by kospe; 03-03-2016 at 04:47 PM.