+ Reply to Thread
Results 1 to 15 of 15

Thread: [PC] X-Rite i1Profiler 1.5

  1. #1
    Donor cooling will become famous soon enough cooling will become famous soon enough
    Join Date
    Jan 2012
    Posts
    73
    Thanks
    6
    Thanked 130 Times in 32 Posts

    [PC] X-Rite i1Profiler 1.5.6

    X-Rite i1 Profiler 1.5.6
    official program download (from X-Rite):
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Crack:
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Password:
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Replace original i1Profiler.exe with the cracked one. Little trick: connect spectrophotometer (or other supported device) BEFORE start the program. If you connect/disconnect the device when the program is running, you will have problems about license (you can do measurements for profiling, but it cannot create the .icc profile) . Tell me your feedbacks.
    Last edited by cooling; 08-11-2014 at 02:07 AM.

  2. The Following 15 Users Say Thank You to cooling For This Useful Post:

  3. #2
    Donor neon is on a distinguished road
    Join Date
    Apr 2011
    Posts
    38
    Thanks
    41
    Thanked 8 Times in 6 Posts
    unfortunately i can't manage to get it work. it starts with a Publish/DeviceLink license but after a couple seconds reverts to the iMatch license which is inside my i1Pro. even if i deactivate the Check version & license status checkbox still doesn't work.

  4. #3
    Donor cooling will become famous soon enough cooling will become famous soon enough
    Join Date
    Jan 2012
    Posts
    73
    Thanks
    6
    Thanked 130 Times in 32 Posts
    Quote Originally Posted by neon View Post
    unfortunately i can't manage to get it work. it starts with a Publish/DeviceLink license but after a couple seconds reverts to the iMatch license which is inside my i1Pro. even if i deactivate the Check version & license status checkbox still doesn't work.
    Try to do measurements for creating profile in DEMO mode with device connected and when it says that you have not license for create profile, disconnect your device...should it works...

  5. #4
    Donor TPJozsef is on a distinguished road
    Join Date
    Jan 2013
    Posts
    41
    Thanks
    40
    Thanked 38 Times in 6 Posts
    The trick was described in an earlier version's thread:

    1. run cracked i1profiler after you connect your device (or connect after you run it, I mix this up usually)
    2. set up and save each step of the measuring settings
    3. measure and save data
    4. disconnect device, close i1profiler
    5. start i1profiler, load settings and data, generate profile


    have fun!

  6. #5
    Banned msmhms is on a distinguished road
    Join Date
    Nov 2011
    Posts
    32
    Thanks
    39
    Thanked 5 Times in 3 Posts
    It works fine.
    Thank you for the share.

  7. #6
    Donor T. Schruda is on a distinguished road
    Join Date
    Jan 2011
    Posts
    278
    Thanks
    11
    Thanked 27 Times in 18 Posts
    thnx for sharing!

  8. #7
    Donor rasselin is on a distinguished road
    Join Date
    Oct 2012
    Posts
    18
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Exclamation Step for profiling with Flexisign pro

    I need help for the different steps. Also any tricks for max ink limit.
    How can I be sure for the light (temperature K)

  9. #8
    Donor cengell is on a distinguished road
    Join Date
    Jul 2013
    Posts
    34
    Thanks
    20
    Thanked 3 Times in 2 Posts
    Quote Originally Posted by cooling View Post
    official program download (from X-Rite):
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Crack:
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Password:
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Replace original i1Profiler.exe with the cracked one. Little trick: connect spectrophotometer (or other supported device) BEFORE start the program. If you connect/disconnect the device when the program is running, you will have problems about license (you can do measurements for profiling, but it cannot create the .icc profile) . Tell me your feedbacks. DO NOT UPDATE (the last is 1.5.4 and NOT work with this crack)

    Thank you very much cooling. I will try it out!

    cengell

  10. The Following 2 Users Say Thank You to cengell For This Useful Post:

  11. #9
    Donor cooling will become famous soon enough cooling will become famous soon enough
    Join Date
    Jan 2012
    Posts
    73
    Thanks
    6
    Thanked 130 Times in 32 Posts
    I've updated first post...with the last version of i1Profiler (1.5.6) cracked...tell me your feedbacks...

  12. The Following 2 Users Say Thank You to cooling For This Useful Post:

  13. #10
    Banned msmhms is on a distinguished road
    Join Date
    Nov 2011
    Posts
    32
    Thanks
    39
    Thanked 5 Times in 3 Posts

    Thanks for the update~

    Quote Originally Posted by cooling View Post
    I've updated first post...with the last version of i1Profiler (1.5.6) cracked...tell me your feedbacks...
    Many thanks~

  14. Your ad here

  15. #11
    Donor delsi77 is on a distinguished road
    Join Date
    Nov 2013
    Posts
    6
    Thanks
    2
    Thanked 0 Times in 0 Posts
    The zip i56.zip is corrupted...

    edit: No, it's ok

  16. #12
    Donor Bojan is on a distinguished road
    Join Date
    Nov 2011
    Posts
    11
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Virus

    Avast detect virus in crack

  17. #13
    PRC Member Bob12345 is on a distinguished road
    Join Date
    Aug 2012
    Posts
    266
    Thanks
    86
    Thanked 33 Times in 19 Posts

    False positive

    Quote Originally Posted by Bojan View Post
    Avast detect virus in crack
    Avast is giving you a 'false positive'. Ignore it.

    Better still, switch to an anti-virus which gives false positives only very rarely, like Kaspersky, or ZoneAlarm AV (which uses the Kaspersky engine).


  18. #14
    Donor mvmservis is on a distinguished road
    Join Date
    Nov 2011
    Posts
    27
    Thanks
    14
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by cooling View Post
    X-Rite i1 Profiler 1.5.6
    official program download (from X-Rite):
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Crack:
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Password:
    Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    Replace original i1Profiler.exe with the cracked one. Little trick: connect spectrophotometer (or other supported device) BEFORE start the program. If you connect/disconnect the device when the program is running, you will have problems about license (you can do measurements for profiling, but it cannot create the .icc profile) . Tell me your feedbacks.
    works great :) BIG thank you! :)

  19. #15
    Donor Bojan is on a distinguished road
    Join Date
    Nov 2011
    Posts
    11
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Avast

    Quote Originally Posted by Bob12345 View Post
    Avast is giving you a 'false positive'. Ignore it.

    Better still, switch to an anti-virus which gives false positives only very rarely, like Kaspersky, or ZoneAlarm AV (which uses the Kaspersky engine).

    Avast for many years work well, I will try it online scan

+ Reply to Thread

Similar Threads

  1. i1profiler
    By gre2gor in forum Color Proofing Management
    Replies: 11
    Last Post: 09-12-2017, 08:16 AM
  2. X-Rite ColorMaster or X-Rite Color Master
    By akwina in forum Requests
    Replies: 2
    Last Post: 08-07-2012, 10:42 AM
  3. Hello, everybody ! I1Profiler
    By alexx_x in forum General Chat
    Replies: 0
    Last Post: 02-19-2012, 01:54 AM
  4. X-Rite i1 Display Pro or X-Rite ColorMunki Display with ProfileMaker Pro?
    By dzianis.puhach in forum Color Proofing Management
    Replies: 10
    Last Post: 01-12-2012, 03:27 AM
  5. NEW i1Profiler
    By sunsailor in forum Installer or Patch Only
    Replies: 3
    Last Post: 07-31-2011, 02:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts