+ Reply to Thread
Results 1 to 1 of 1

Thread: Delcam FeatureCam 2013 R2 SP1 Build (x32/x64)

  1. #1
    Senior Member freeoldman is on a distinguished road
    Join Date
    Aug 2012
    Thanked 26 Times in 24 Posts

    Delcam FeatureCam 2013 R2 SP1 Build (x32/x64)


    Delcam FeatureCam 2013 R2 SP1 Build (x32/x64) | 1.6 Gb

    Delcam launches the 2013 release of FeatureCAM feature-based CAM software. This will offer a new series of options for three-axis milling and enhancements in -axis machining, plus improvements in the turning and mill-turn modules.

    FeatureCAM was the world’s first feature-based programming software when it was launched in 1995. Constant development since then has ensured that the system has retained its leadership in programming speed and ease of use, while an increased range of strategies has been added to provide more efficient toolpaths giving greater productivity on a wider range of machines.

    What's fixed in Delcam FeatureCam 2013 R2 SP1 Build
    A-030721 B FIXED 2-axis milling: Chamfer: Reflecting a chamfer feature reverses side control.
    A-032943 B FIXED FC VERICUT: FeatureCAM dll used by VERICUT addin is out of date; as a result, the addin doesn't work.
    A-032902 B FIXED FC User interface: 2D milling: The helical ramping checkbox and related attributes are being set on the operation instead of the feature.
    A-032894 B FIXED D,FC User interface: 2-axis milling: Minimum ramp distance attribute is different from what the pop-up help suggests.
    A-032842 B FIXED Install: the uninstaller name for FC 2013 is set as FeatureCAM2012.
    A-032575 B FIXED FC User Interface: Paste Special is unable to paste to object of pattern
    A-031858 F FIXED Desire a program which would help developers to create monthly reports.
    A-032674 B FIXED FC Turn/Mill: Import Wizard : Unable to create revolve boundary if we import the part in existing project
    A-032761 B FIXED D User interface: Warning message go behind SolidWorks making SW window to freeze.
    A-032470 B FIXED FC Turn/Mill: 5-axis simultaneous: Rapid move between operations is output as XYZC move and needs to be C then XYZ for RTCP intsupport#56935
    A-032727 B FIXED D GPF: unable to open assembly file causes solidworks to crash.
    A-032484 B FIXED FC Probing: User Interface: In the metric document probing features are represented with too small sign of probe touching.
    A-032805 B FIXED FC dongle: in IDD_INTERFACES_NET_JPN the vericut checkbox is set to not be visible
    A-030655 B FIXED 2-axis milling: Tools: FC uses F/S from last applied tool to all tools of the feature.
    A-032744 B FIXED FC Translation: Russian: Tool specific feeds and speeds update for a tool automatically updates F/S for all tools.
    A-032506 B FIXED FC Import: Round stock center selection; Center of cylindrical stock shifted from selected surface.
    A-032595 F FIXED FC API: FMPartLibraryModel modification and macro to build bit machining demo part
    A-032735 B FIXED D,FC 2 axis milling; when partline programming is selected in a side feature, it is causing output of going round and round the part
    A-032756 B FIXED FC Turn/Mill: Face: 3D simulation away from face; centerline simulation OK
    A-032757 B FIXED FC TPEDIT: Arcs converted to full loops while hitting "Apply and Next" repeatedly in edit toolpath segment tab.
    A-032769 B FIXED D User interface: 3-axis milling: The dialog box for 3d milling strategy attributes needs to be adjusted, some controls are being clipped due to the font change to SegoeUI
    A-032739 B FIXED FC Turn:GPF: Canned Cycles with Reuse path in canned cycle and undersize stock causes FeatureCAM to crash
    A-032768 B FIXED FC UI: Need more dialog space for translation.
    A-032661 B FIXED D,FC Wire EDM: part compare is not available unless 3d milling is also on the seat. (DFS too)
    A-032732 B FIXED FC API: Optional parameter doesn't work in function DrawToolToBMPFile.
    A-032741 B FIXED Testing: Need ability to use .stl files as output files.
    A-032644 B FIXED FC TPEDIT: Turn: overridden data of maximum speed and approach speed for turn features is not propagated to a toolpath feature
    A-032622 F FIXED D user interface: plunge attrs: add pop-up help images
    A-032641 F FIXED D,FC 5-axis simultaneous: better tool holder geometry passed to dmk
    A-032723 F FIXED FC API: Need ability to export a 3D tool holder to .stl file.
    A-029776 F FIXED D,FC User interface: lists of attributes should have images and help text.
    A-032452 F FIXED FC user interface: Create tooltips for the attributes moved to the new 'Plunge tab'.
    A-032221 B FIXED Turn/Mill: Xbuild: Changes to post processor are not saved on exit.
    A-032140 B FIXED FC GPF: fc crashes while reflecting the pattern.
    A-032652 B FIXED FC User interface: feed speed: IPT feed changes each time if we reselect it with override option checked.
    A-032692 B FIXED FC User Interface: Bottom Finish Allowance label is in Inches even though session units are Metric
    A-032298 B FIXED FC 2-axis drilling: Computed drilling cycle omits move to plunge clearance.
    A-032519 B FIXED Part Library: Renaming a feature after it has been added to the part library does not rename the tool and feed/speed overrides. So pasting the attributes only to a target feature does not apply the overrides.
    A-032628 F FIXED D xpress: make it be a separate build target.
    A-032651 B FIXED FC Tool Selection: Tool override doesnt select desired tool when "Optimize Spot drill" tool selection is on.
    A-032680 B FIXED Centerline sim: Single step (at slow speed) shows whole z-level
    A-032689 B FIXED User Interface: Can't interupt 3d surface milling without freezing the graphics screen for a while.
    A-032708 B FIXED D,FC Turn: groove: It is necessary to remove Side liftoff angle attribute from turning tab of the Simple groove feature properties
    A-032705 B FIXED FC User interface: Please reorder modules in Evaluation options and About FeatureCAM dialogs.
    A-032254 B FIXED Xbuild: New reserved word has not been implemented.
    A-032699 B FIXED D 3-Axis Milling: Angle start and end for 3D radial finish is in inches not degrees!
    A-032533 B FIXED dongle: eval options: 5-axis simultaneous does not appear to depend upon 5-axis positioning
    A-032696 B FIXED D,FC 3dmx: 5-axis simultaneous should be available for 3dmx.
    A-032642 B FIXED TPEDIT: Can't turn cutter comp off on toolpath edit feature created from turning feature.
    A-031473 B FIXED FC Turn/Mill: Pattern Dialog Boxes are inconsistent
    A-031880 B FIXED FC User interface: TPEDIT: right click menu says "Split move", whereas the toolbar says "Split segment".
    A-032217 F FIXED Turn/Mill: indexing position is outside machine travel limits with long tool
    A-032608 B FIXED D,FC Turn: Transfer: Cutoff operation can be ordered before pre & post cutoff transfer operations when using template automatic ordering options
    A-032526 B FIXED FC api: bulk edit macro: modify strategy of a drill/mill hole confuses fc
    A-032508 B FIXED FC MTT: Collision with 'Cutoff' feature parameters for transferring to the sub spindle.
    A-032633 B FIXED FC Tool database: GPF: Thread mill tool selection from exported powermill tool database crashes FeatureCAM

    About Delcam plc

    Delcam is a world-leading developer and supplier of advanced CADCAM software, with more than 35,000 customers in over 80 countries. These clients vary from global names like Nike, Boeing and Mattel to small start-ups and individual craftsmen. Founded 30 years ago, we are the largest developer of product development software in the UK, with subsidiaries in Europe, America and Asia. Our global success has been recognised with many awards, including three Queen’s Awards for Enterprise in the last six years.

    Only the registered members can see the download links/content. please Register to gain full access.

  2. The Following User Says Thank You to freeoldman For This Useful Post:

+ Reply to Thread

Similar Threads

  1. DVD-Clr 2013 10.10 build 1203 Final
    By msstdfmt in forum Classic Tools
    Replies: 0
    Last Post: 01-09-2013, 08:14 AM
  2. DVD-Clr 2013 10.00 build 1202 Final
    By msstdfmt in forum Classic Tools
    Replies: 0
    Last Post: 12-08-2012, 11:03 AM
  3. DVD-Clr 2013 10.00 build 1201 Final
    By msstdfmt in forum Classic Tools
    Replies: 0
    Last Post: 12-05-2012, 08:40 AM
  4. Replies: 0
    Last Post: 09-19-2012, 11:34 AM
  5. Replies: 0
    Last Post: 09-09-2012, 02:40 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts