+ Reply to Thread
Page 20 of 24 FirstFirst ... 10 18 19 20 21 22 ... LastLast
Results 286 to 300 of 356

Thread: Onyx ProductionHouse X10

  1. #286
    Banned sstepout is on a distinguished road
    Join Date
    Dec 2012
    Posts
    15
    Thanks
    1
    Thanked 2 Times in 2 Posts
    100% this onyx 732 and x10 is not support for epson surecolor drivers

  2. #287
    Donor Dopesquard is on a distinguished road
    Join Date
    Nov 2012
    Posts
    35
    Thanks
    3
    Thanked 1 Time in 1 Post

    Slow printing speeds

    Ok, I have an Epson GS6000. It used to rock when it printed, not it prints much slower with onyx. I have had onyx working for a few months now and I have printed a lot of large photo images for wallpapers.

    We have noticed though, that the printing speed is about 3 times slower than when we first had a trial of EFI..
    Could it be because it is a cracked version or is onyx actually slower? :S

    Any else had issues with printing speed?

  3. #288
    Junior Member everlastpl is on a distinguished road
    Join Date
    Apr 2013
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Cannot Start Print

    Hi Guys,

    I am new to the forum.

    I am running a Mutoh Rockhopper 38 changed to Eco Ultra (Falcon Junior Outdoor).

    Operating system: Win 7 (x64)

    I have had a problem in getting stuff to print on this Onyx 10 (CANNOT START PRINT ERROR) and after awhile I think I found a way to solve it (it took me couple of days though:)

    What worked for me was:
    1. Install Onyx as per instructions
    2. replace the files
    3. run p.exe
    4. Install the Download Manager
    5. In some installations you have to replace the .rar file to stop it asking for the key.
    6. Then install the printer.

    Now here is the fun part. (and how easy that was)
    Go to Onyx website and register (you dont need to provide any Key, registration takes a minute).
    After you are registered you can go to Download section.
    Download all 3 updates (including HASP)
    Install them.

    Restart system.

    Now replace all the files again (2.)
    Run p.exe again

    Restart

    It should send the file to print no problem and print without the white line/cross

    Hope that helps

  4. The Following User Says Thank You to everlastpl For This Useful Post:

  5. #289
    Donor Dopesquard is on a distinguished road
    Join Date
    Nov 2012
    Posts
    35
    Thanks
    3
    Thanked 1 Time in 1 Post
    What white line/ cross?

    Are you printing at a normal speed or do you find that it has been curbed?

  6. #290
    Junior Member everlastpl is on a distinguished road
    Join Date
    Apr 2013
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Cannot Start Print

    hi,

    White line is printed when Onyx is in demo mode - which it would be recognised us when updates and new HASP is downloaded and installed hence cracking again (copying files and launching p.exe again). Hope this makes sense.

  7. #291
    Banned shopclues123 is on a distinguished road
    Join Date
    Mar 2013
    Posts
    67
    Thanks
    34
    Thanked 26 Times in 15 Posts
    waste of time

  8. #292
    Donor mbrown083 is on a distinguished road
    Join Date
    Apr 2013
    Posts
    21
    Thanks
    7
    Thanked 0 Times in 0 Posts
    Flexi 8 will work have the same printer should be lots of links for it

  9. #293
    Junior Member surajprepress is on a distinguished road
    Join Date
    Nov 2012
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts

    about onyx 10.5.2

    Dear Sir,
    I read your thread and request u to mail me the key no. so i will download the onyx 10.2.5 from the onyx site. If it has a limitation for 30 days i can bypass the file and make it permanent
    thanks
    email : [email protected]

  10. #294
    Junior Member surajprepress is on a distinguished road
    Join Date
    Nov 2012
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts
    what is ur operating system
    if windows 7 32 or 64 bit i will upload the patch
    the driver for hp designjet L25500 should be downloaded from the onyx site of the version X10 only

  11. #295
    Junior Member everlastpl is on a distinguished road
    Join Date
    Apr 2013
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Mutoh Rockhopper 38 media

    Hi Guys,

    Has anybody got any media presets for Onyx 10 (mutoh rockhopper 38/falcon outdoor junior)???

    I am using 3 year monomeric intermediate vinyls (Metamark). When using any of the loaded presets my prints look too light. (black is greyish and green is too yellow, especially with micro dot option on).

    I dont have any tools to measure the colours myself so Im just trying to tweak existing profiles.

    Can anybody help??
    Last edited by everlastpl; 04-11-2013 at 02:29 PM. Reason: spelling error

  12. Your ad here

  13. #296
    Junior Member Ericnobody is on a distinguished road
    Join Date
    Apr 2013
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    In regards to cracking

    It's fairly simple, i'll be it muddled, since i've seen a few req's for an explanation, i'll go at it. I had a flawless install on xp 32 (clean os install as well)

    Extract until you have the setup files and folders available.

    open !!!Licence!!! folder, and run "ONYX Printer & Profile Download Manager"

    follow steps to install.

    navigate to its install folder and then to the "lib" folder and replace mediadownloader.dasho.jar and add the mediadownloader.dasho folder from the !!!Licence!!! folder.

    launch onyx print and profile manager, and accumulate your required printer data, follow steps to create a .prninst file. place on desktop or somewhere easy to locate.

    navigate to the beginning folder and launch setup. follow the instructions to complete setup.

    after setup, onyx will attempt to launch and ask for your hasp. Hit cancel, aborting the launch.

    return to the !!!Licence!!! folder and copy THE CONTENTS of the "Onyx ProductionHouse X10" folder and copy them to the directory you installed onyx to, overwritting whenever asked.

    Laucnh productionhouse, and install the .prninst fill ask directed.

    set up your printer

    Have fun!

    Great crack, worked like a charm for me.

  14. #297
    Junior Member 22ece is on a distinguished road
    Join Date
    Apr 2013
    Posts
    5
    Thanks
    0
    Thanked 2 Times in 2 Posts

    All Lind deads

    Hi,
    Maybe I am late but all links dead...

    sEvgiyle,
    eCe
    :E)

  15. #298
    PRC Member spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all spider is a name known to all
    Join Date
    Nov 2010
    Posts
    1,271
    Thanks
    123
    Thanked 607 Times in 342 Posts
    Quote Originally Posted by Ericnobody View Post
    It's fairly simple, i'll be it muddled, since i've seen a few req's for an explanation, i'll go at it. I had a flawless install on xp 32 (clean os install as well)

    Extract until you have the setup files and folders available.

    open !!!Licence!!! folder, and run "ONYX Printer & Profile Download Manager"

    follow steps to install.

    navigate to its install folder and then to the "lib" folder and replace mediadownloader.dasho.jar and add the mediadownloader.dasho folder from the !!!Licence!!! folder.

    launch onyx print and profile manager, and accumulate your required printer data, follow steps to create a .prninst file. place on desktop or somewhere easy to locate.

    navigate to the beginning folder and launch setup. follow the instructions to complete setup.

    after setup, onyx will attempt to launch and ask for your hasp. Hit cancel, aborting the launch.

    return to the !!!Licence!!! folder and copy THE CONTENTS of the "Onyx ProductionHouse X10" folder and copy them to the directory you installed onyx to, overwritting whenever asked.

    Laucnh productionhouse, and install the .prninst fill ask directed.

    set up your printer

    Have fun!

    Great crack, worked like a charm for me.
    so you wanna tell us that layout editor and cut server is working for you???

  16. #299
    Junior Member aodxxl is on a distinguished road
    Join Date
    Apr 2013
    Location
    Romania, Baia Mare
    Posts
    23
    Thanks
    6
    Thanked 2 Times in 2 Posts
    Onyx works but the layout tool doesn not. When i start it it starts normally but then the problems appear . Doesnt load any preview for images when they are loaded in layout tool. Doesnt allow me to change the layout style , the buttons just dont do anything ; When i play arround in it it just tops responding to any button presses and so on.

    So i can definetly tell you that layout tool doesnt work.

  17. #300
    Donor ravrav is on a distinguished road
    Join Date
    Feb 2013
    Posts
    53
    Thanks
    4
    Thanked 3 Times in 3 Posts
    Wow, theres been quite a few replies on here. some were incredibly helpful. Spider your a star! youve really helped me out buddy so just wanna say thanx. ill pm you sometime tommorw and dont forget you need to send me your details :-) decided to stick with colourgate in the end!!

+ Reply to Thread
Page 20 of 24 FirstFirst ... 10 18 19 20 21 22 ... LastLast

Similar Threads

  1. Onyx ProductionHouse X10
    By dee in forum Installer or Patch Only
    Replies: 12
    Last Post: 11-12-2012, 10:20 AM
  2. Onyx ProductionHouse 7.0.6
    By ivo1234 in forum Full Software
    Replies: 46
    Last Post: 05-12-2012, 10:46 PM
  3. Onyx ProductionHouse X10 RIP
    By miklik61 in forum Requests
    Replies: 0
    Last Post: 11-12-2010, 02:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts