+ Reply to Thread
Results 1 to 7 of 7

Thread: Ecrm + Rip 9.0

  1. #1
    Donor Marcustv is on a distinguished road
    Join Date
    Aug 2012
    Posts
    110
    Thanks
    9
    Thanked 10 Times in 9 Posts

    Ecrm + Rip 9.0

    I'm trying to run a ECRM VR45 ECRM rip with a 9.0.
    The machine does not print and I have a communication error with the same.
    In "Configure rip extras" there are two entries "Filmsetter ECRM RIP" and "ECRM Disable Output" that are in OFF missing me the serial.
    The installation code is the classic 15124-28
    It 'true that I can also have problems with the Eprom of Pelbox if they are not updated to version 1.11?
    Currently I have the version 1.05.

  2. #2
    PRC Member johnlongthomas is on a distinguished road
    Join Date
    Jun 2011
    Posts
    160
    Thanks
    38
    Thanked 31 Times in 22 Posts
    It is a long time since i have done this but you need to be sure that the scsi driver is loaded and working and that the imager is set to serial mode. I think. Also you will find the whole thing easier if you use xp rather than 7 or 8

  3. #3
    Donor Marcustv is on a distinguished road
    Join Date
    Aug 2012
    Posts
    110
    Thanks
    9
    Thanked 10 Times in 9 Posts
    I use XP.
    Is normal that in "Configure rip extras" there are two entries "Filmsetter ECRM RIP" and "ECRM Disable Output" that are in OFF ?
    Is neccessary the serial ?

  4. #4
    PRC Member johnlongthomas is on a distinguished road
    Join Date
    Jun 2011
    Posts
    160
    Thanks
    38
    Thanked 31 Times in 22 Posts
    sounds to me like you have workflow version. look inside the install folder and run the rip from the exe and you will see the same old interface

  5. #5
    Donor Marcustv is on a distinguished road
    Join Date
    Aug 2012
    Posts
    110
    Thanks
    9
    Thanked 10 Times in 9 Posts
    The rip work .. what is wrong is the dialogue with the imaging unit

  6. #6
    PRC Member johnlongthomas is on a distinguished road
    Join Date
    Jun 2011
    Posts
    160
    Thanks
    38
    Thanked 31 Times in 22 Posts
    ECRM_RIPv8.1 êëþÕ (SP50154-38) - maybe

  7. #7
    Donor Marcustv is on a distinguished road
    Join Date
    Aug 2012
    Posts
    110
    Thanks
    9
    Thanked 10 Times in 9 Posts
    I found in this forum thread
    HTML Code:
    Only the registered members can see the download links/content. please Register to gain full access.
    My same problem

+ Reply to Thread

Similar Threads

  1. new ecrm rip 10
    By sanfia in forum Imposition & RiP
    Replies: 3
    Last Post: 08-07-2016, 08:35 PM
  2. ecrm 8.3 NEW
    By sanfia in forum Imposition & RiP
    Replies: 3
    Last Post: 03-24-2016, 09:41 PM
  3. ECRM RIP 8.3 with FujiFilm PI 1400 aka ECRM VR36HS
    By sid6581 in forum Imposition & RiP
    Replies: 8
    Last Post: 06-23-2015, 09:14 PM
  4. Ecrm rip 9.0
    By sanfia in forum Imposition & RiP
    Replies: 7
    Last Post: 01-29-2013, 09:08 AM
  5. ecrm rip
    By sanfia in forum Imposition & RiP
    Replies: 2
    Last Post: 12-28-2011, 11:23 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts