+ Reply to Thread
Results 1 to 1 of 1

Thread: Packaging Tech Tip - resizing bottom panel / auto bottom

  1. #1
    Donor 0000 is on a distinguished road
    Join Date
    Aug 2012
    Posts
    36
    Thanks
    6
    Thanked 6 Times in 6 Posts

    Packaging Tech Tip - resizing bottom panel / auto bottom

    Adjusting bottom panel to requested size - box with semi auto/auto bottom


    1. Start with 2d design and select which of side panels of bottom parts that overlap when box is folded will be fixed (most right or left, not in the middle)

    2. Select all bottom parts except of fixed (it means fixed is 1 st, the next to it is 2 nd, etc.)

    3. Rotate 3 selected panels 90 degree to bottom side with pivot point set on the connection point (crease end) of fixed and 2 nd panel.

    4. Repeat step 3 for 2 selected panels ( 3 rd and 4 th) with pivot on connection point of 2 nd and 3 rd , then for last panel ( 4th) with pivot set on connection 3 rd and 4th

    5. Rectangle will be formed - bottom panel folded shown flat in 2d

    6. Create new rectangle with dimension you requested - it will be you guide line / reference shape

    7. Position both rectangles so they overlap and share corner point.

    8. Stretch verticaly or/and horizontally you first rectangle until you fit the exact size of reference shape.

    If you use numbers in your app. (numeric input) you don`t go steps 6-8 !!! Just select your folded rectangle and enter new width and height.

    9. Repeat steps 3-4 the other way round so you unfold your bottom panel.

    No need to use standards (artios, engview, etc.) and play with parameters.

    Hope this will help some of you.

    Cheers
    Last edited by 0000; 02-26-2013 at 11:45 AM.

  2. The Following User Says Thank You to 0000 For This Useful Post:

+ Reply to Thread

Similar Threads

  1. Neo Sans & Neo Tech Families OTF
    By figui in forum Resources
    Replies: 3
    Last Post: 03-28-2012, 01:59 AM
  2. Resizing in Signa Station?
    By djenous in forum Imposition & RiP
    Replies: 4
    Last Post: 03-07-2012, 05:17 AM
  3. PHOTOSHOP: Smart Object links panel
    By jasonlee0510 in forum Graphic Design
    Replies: 0
    Last Post: 08-02-2011, 02:19 PM
  4. LC-TECH SanDisk RescuePRO Deluxe v4.5.0.10
    By worker in forum Classic Tools
    Replies: 0
    Last Post: 05-05-2011, 09:15 AM
  5. LC-TECH PHOTORECOVERY 2011 v5.0.0.0
    By worker in forum Classic Tools
    Replies: 0
    Last Post: 05-05-2011, 09:10 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts